Leveling Feet & Glides
Machine feet, vibration mounts, adjustable glides and pads.
Also searched as: machine feetleveling mountsadjustable feetvibration pads
-
-
-
LEVELING FEET
Thread Size: 5/8"-11
-
-
from $0.50Made-in-China $0.50 -
Adjustable Black Plastic Cabinet Legs Foot
Height Adjustment: 100-160 mm
from $0.15Made-in-China $0.15 -
Adjustable Fixed Leveling Feet with 3/8-16 Inch Screw Bolt M10*38
Screw Size: M10*38Thread Size: 3/8 inch-16
from $0.03Made-in-China $0.03 -
-
-
Adjustable Kitchen Cabinet Legs Feet
Height: 150 mm
from $0.10Made-in-China $0.10 -
-
-
from $0.02Made-in-China $0.02 -
-
Adjustable Screw-on Plastic Feet
Height Adjustment: 105-150 mm
from $0.03Made-in-China $0.03 -
Adjustable Self Leveling Feet
Feature: Adjustable
-
Air Conditioner Shock Pad, Rubber Isolator Feet, Vibration Isolator Pads for Outdoor Air Conditioner
from $0.14Made-in-China $0.14 -
from $5.00Made-in-China $5.00 -
-
Anti Vibration Pads
Shape: ConicalSize: 6.7*6.7*3.7cm
-
-
-
-
-
-
-
from $0.22Made-in-China $0.22 -
-
Buffer Damper Rubber Feet for Furniture / Machine Leveling
Certification: ISO / SGSHS Code: 4016939000Lead Time: About 7-15daysMaterial: EPDMModel NO.: SKF116
from $0.01Made-in-China $0.01 -
Conveyor Support Adjustable Articulated Level Feet
Base D: 79Base Material: PlasticsCertification: ISO9001-2015HS Code: 84313900Load (Kg): 100
from $0.10Made-in-China $0.10 -
from $0.36Made-in-China $0.36 -
from $5.00Made-in-China $5.00 -
-
Fixed Adjustable Feet Series Carbon Steel Foot Cup
Application: Production LineBearing: BearingCertification: ISO9001-2015HS Code: 84313900Installation: Horizontal
from $0.30Made-in-China $0.30 -
Fixed/Swivel Screw Leveling Feet Adjustable Cabinet Leg, Base Diameter 38mm 50mm 60mm 80mm 100mm 125mm
Base Diameter: 38mm, 50mm, 60mm, 80mm, 100mm, 125mm
from $0.48Made-in-China $0.48 -
Heavy Duty Adjustable Fixed Leveling Feet with 3/8-16 Inch Screw Bolt
Thread Size: 3/8 inch-16
from $0.25Made-in-China $0.25
About leveling feet & glides
Leveling feet and glides provide stable, adjustable support for machinery and equipment, accommodating uneven surfaces and facilitating precise alignment. This category encompasses a range of components including fixed machine feet, articulating leveling mounts, and vibration damping pads. Key selection criteria include static and dynamic load capacity, typically specified in Newtons or pounds, which must exceed the applied load by an appropriate safety factor. Threaded studs, commonly available in metric (e.g., M8, M10, M12, M16) and imperial (e.g., 3/8-16, 1/2-13) sizes, connect the foot to the equipment. Base diameters range from 20mm to over 150mm, influencing stability and load distribution. Materials vary, with bases often made from reinforced polyamide, steel, stainless steel (AISI 303, 304, 316), or zinc-plated steel for corrosion resistance. Gliding pads may feature felt, PTFE, or rubber. Vibration isolation is achieved through elastomeric materials such as NBR, EPDM, or natural rubber, selected based on durometer hardness and resonant frequency requirements to attenuate specific frequency ranges.
How to choose
Selecting the correct leveling foot begins with determining the total static load and dividing it by the number of support points to establish the load per foot. Next, identify the required stud diameter and thread pitch to match the equipment's mounting provisions. Consider the necessary height adjustment range to compensate for floor irregularities. Evaluate the operating environment: corrosive conditions necessitate stainless steel, while hygienic applications may require specific polymer bases. Finally, if vibration isolation is critical, specify the type of elastomer and its durometer to achieve the desired damping characteristics for the specific vibration frequencies present, balancing isolation effectiveness against stability.