Leveling Feet & Glides
Machine feet, vibration mounts, adjustable glides and pads.
Also searched as: machine feetleveling mountsadjustable feetvibration pads
-
-
-
Adjustable Furniture Leveling Feet
Insert Length: 1.75"Thread: 3/8-16”
-
LEVELING FEET
Thread Size: 5/8"-11
-
Machine Leveling Foot
Bolt Length: 79 mmThread Size: M24
-
-
1-1/16 in. Round Threaded Stem Self-Leveling Furniture Glides
Diameter: 1-1/16 in.
-
1/2"-13, 2 in Bolt Lg, Leveling Mount
Bolt Length: 2 inThread Size: 1/2"-13
from $14.83Grainger $14.83 -
1/4-20 Rubber Leveling Feet
Thread Size: 1/4-20
-
27mmDia x 54mm Style B Positioning Feet
Diameter: 27 mmLength: 54 mm
-
28 mm Furniture Leveler Adjustable Legs
Diameter: 28 mm
-
5/16-18 Stainless Steel Adjustable Furniture Levelers
Thread Size: 5/16-18
-
50mm Dia Adjustable Furniture Glides
Diameter: 50mm
-
from $0.50Made-in-China $0.50 -
Adjustable Black Plastic Cabinet Legs Foot
Height Adjustment: 100-160 mm
from $0.15Made-in-China $0.15 -
-
-
Adjustable Fixed Leveling Feet with 3/8-16 Inch Screw Bolt M10*38
Screw Size: M10*38Thread Size: 3/8 inch-16
from $0.03Made-in-China $0.03 -
-
Adjustable Furniture Feet M8
Thread: M8
-
-
-
Adjustable Furniture Glide Leveling Feet Pad, Dia 40mm 50mm 80mm Nylon Base, Threaded M8 M10 M12 M16
Base Diameter: 40 mm, 50 mm, 80 mmThread: M8, M10, M12, M16
-
-
-
Adjustable Furniture Levelers
Screw Length: 0.7" (18mm)Total Height: 1" (25mm)
-
Adjustable Heavy Duty Furniture Levelers
Load Capacity: 1320 lbsThread Size: 3/8"-16
from $13.89Amazon $13.89 -
-
-
-
Adjustable Kitchen Cabinet Legs Feet
Height: 150 mm
from $0.10Made-in-China $0.10 -
Adjustable Leg Leveling Feet
Thread: M10 M12 Female
-
-
from $13.25Amazon $13.25 -
Adjustable Leveling Feet
Size: 1 in x 1 in
-
About leveling feet & glides
Leveling feet and glides provide stable, adjustable support for machinery and equipment, accommodating uneven surfaces and facilitating precise alignment. This category encompasses a range of components including fixed machine feet, articulating leveling mounts, and vibration damping pads. Key selection criteria include static and dynamic load capacity, typically specified in Newtons or pounds, which must exceed the applied load by an appropriate safety factor. Threaded studs, commonly available in metric (e.g., M8, M10, M12, M16) and imperial (e.g., 3/8-16, 1/2-13) sizes, connect the foot to the equipment. Base diameters range from 20mm to over 150mm, influencing stability and load distribution. Materials vary, with bases often made from reinforced polyamide, steel, stainless steel (AISI 303, 304, 316), or zinc-plated steel for corrosion resistance. Gliding pads may feature felt, PTFE, or rubber. Vibration isolation is achieved through elastomeric materials such as NBR, EPDM, or natural rubber, selected based on durometer hardness and resonant frequency requirements to attenuate specific frequency ranges.
How to choose
Selecting the correct leveling foot begins with determining the total static load and dividing it by the number of support points to establish the load per foot. Next, identify the required stud diameter and thread pitch to match the equipment's mounting provisions. Consider the necessary height adjustment range to compensate for floor irregularities. Evaluate the operating environment: corrosive conditions necessitate stainless steel, while hygienic applications may require specific polymer bases. Finally, if vibration isolation is critical, specify the type of elastomer and its durometer to achieve the desired damping characteristics for the specific vibration frequencies present, balancing isolation effectiveness against stability.