Piston Seal, 4 1/8 ID x 4 1/2 OD, 3/16 W x 3/16 H
This piston seal has an inside diameter of 4.125 inches and an outside diameter of 4.5 inches, with a width and height of 0.1875 inches. It has a durometer of 95 Shore A, a maximum pressure of 5000 psi, and a maximum speed of 3.0 fps. This seal is used in large-bore, high-pressure hydraulic cylinders.
Specifications
| Durometer | 95 Shore A |
|---|---|
| Height | 0.1875 in |
| Inside Diameter | 4.125 in |
| Max Pressure | 5000 psi |
| Max Speed | 3.0 fps |
| Outside Diameter | 4.5 in |
| Temperature Range | -35 to 220 Degrees F |
| Width | 0.1875 in |
About pistons, rods & seals kits
Piston Seal, 4 1/8 ID x 4 1/2 OD, 3/16 W x 3/16 H is listed under Pistons, Rods & Seals Kits — piston assemblies, chrome rod, seal kits and rebuild parts. Pistons, Rods & Seals Kits encompass the critical components required for the assembly, repair, or refurbishment of hydraulic and pneumatic cylinders. Piston assemblies typically include the piston head, which translates fluid pressure into mechanical force, often featuring an integral or attached piston rod connection.
Compare this against other pistons, rods & seals kits, or search the full index for equivalents from other manufacturers.
Where to buy
1 supplier carry this part. Prices are last-seen and change without notice.
-
Zoro distributor · USSee priceView at Zoro →
