KB KinnerBuilder
Home / O-Rings / Nitrile 'O' Ring, 1 in. OD x 3/4 in. ID x 1/8 in. Thickness
Nitrile 'O' Ring, 1 in. OD x 3/4 in. ID x 1/8 in. Thickness

Nitrile 'O' Ring, 1 in. OD x 3/4 in. ID x 1/8 in. Thickness

Nitrile O-Rings

This Nitrile 'O' Ring has an outside diameter of 1 in., an inner diameter of 3/4 in., and a thickness of 1/8 in. These dimensions define the O-ring's size for fitting into a groove. It is typically used for sealing against fluid or gas leakage.

Specifications

Inner Diameter3/4 in
Outside Diameter1 in
Thickness1/8 in

About o-rings

Nitrile 'O' Ring, 1 in. OD x 3/4 in. ID x 1/8 in. Thickness is listed under O-Rings — buna-n, viton, silicone and epdm o-rings by as568 dash number. O-rings are toroidal seals, typically circular in cross-section, designed to be seated in a groove and compressed during assembly to create a seal between two or more parts. They are critical components in static and dynamic sealing applications across various industries, preventing leakage of fluids or gases.

Compare this against other o-rings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in o-rings

Nitrile O-Ring, AS568-124, 70 Duro Nitrile O-Ring, AS568-124, 70 Duro 1 supplier O-Ring O-Ring 1 supplier O-Ring Nitrile Rubber 28mm x 38mm x 5mm O-Ring Nitrile Rubber 28mm x 38mm x 5mm 1 supplier Nitrile O-Ring 6mm thickness, OD 50-95mm Nitrile O-Ring 6mm thickness, OD 50-95mm FUSHI 1 supplier AS568 O-Ring Kit: Fluorosilicone, Round AS568 O-Ring Kit: Fluorosilicone, Round 1 supplier O-ring O-ring 1 supplier 9/16 in. O.D x 3/8 in. I.D x 3/32 in. Thickness Nitrile 'O' Ring 9/16 in. O.D x 3/8 in. I.D x 3/32 in. Thickness Nitrile 'O' Ring Hillman 1 supplier O-Ring O-Ring 1 supplier