KB KinnerBuilder
Home / O-Rings / O-Ring
O-Ring

O-Ring

Nitrile Buna O-Rings

This O-Ring is black in color with a cross section of 1.60 mm (0.063 inches). It has a durometer of 90 Duro, indicating its hardness. This O-ring is used in sealing applications where a specific cross-sectional dimension and material hardness are needed.

Specifications

ColorBlack
Cross Section1.60 mm
Cross Section (in)0.063 in
Durometer90 Duro

About o-rings

O-Ring is listed under O-Rings — buna-n, viton, silicone and epdm o-rings by as568 dash number. O-rings are toroidal seals, typically circular in cross-section, designed to be seated in a groove and compressed during assembly to create a seal between two or more parts. They are critical components in static and dynamic sealing applications across various industries, preventing leakage of fluids or gases.

Compare this against other o-rings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in o-rings

Nitrile Rubber O-Ring, 30mm Inner Diameter Nitrile Rubber O-Ring, 30mm Inner Diameter uxcell 1 supplier VITON Heat Resistant O-Rings VITON Heat Resistant O-Rings Eastern Industrial Products Inc. 1 supplier Rubber O-Ring, 2" x 2-3/16" x 3/32" Rubber O-Ring, 2" x 2-3/16" x 3/32" Midwest Fastener 1 supplier Nitrile (NBR) O-Ring, AS568-451, 70 Durometer Nitrile (NBR) O-Ring, AS568-451, 70 Durometer 1 supplier Nitrile Buna O-Ring AS568-333 Nitrile Buna O-Ring AS568-333 1 supplier Round Profile O-Ring Round Profile O-Ring 1 supplier O-Ring: 10.50 mm OD, 8.50 mm ID, 1.00 mm Thick O-Ring: 10.50 mm OD, 8.50 mm ID, 1.00 mm Thick 1 supplier 7/16 in. O.D x 1/4 in. I.D x 3/32 in. Thickness Nitrile 'O' Ring 7/16 in. O.D x 1/4 in. I.D x 3/32 in. Thickness Nitrile 'O' Ring Hillman 1 supplier