Bushing 3/8" ID x 1/2" OD x 1/4" L

Kelley Bushings MPN 135-019 Bushings & Plain Bearings

This Bushing has an inside diameter of 3/8 inch, an outside diameter of 1/2 inch, and an overall length of 1/4 inch. These dimensions specify the bore for a shaft, the outer dimension for housing, and the axial length of the bushing. It is typically used to reduce friction and wear between moving parts.

Specifications

Inside Diameter	3/8 inch
Outside Diameter	1/2 inch
Overall Length	1/4 inch

About bushings & plain bearings

Bushing 3/8" ID x 1/2" OD x 1/4" L is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.