Plain Bushing Bearing, Closed, ID 0.750 In

Thomson MPN FNYBU12 Aluminum Bushings & Plain Bearings

This Thomson Plain Bushing Bearing, MPN FNYBU12, has an Inner Diameter of 0.750 inch, an Outer Diameter of 1.187 inch, and a Static Load Capacity of 8451.621 N. The static load capacity indicates the maximum load it can withstand without permanent deformation. It is used for supporting shafts under stationary loads.

Specifications

Inner Diameter	0.750 in
Outer Diameter	1.187 in
Static Load Capacity	8451.621 N

About bushings & plain bearings

Plain Bushing Bearing, Closed, ID 0.750 In is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.