Flanged Steel Bushing

This is a flanged steel bushing with a 0.375 inch bore, 0.5625 inch outside diameter, and 1 inch length. The flange has a 0.75 inch outside diameter and 0.0625 inch length, providing axial location and support. It is used to reduce friction and support rotating or sliding shafts.

Specifications

Bore	0.375 inch
Flange Length	0.0625 inch
Flange Outside Diameter	0.75 inch
Length	1 inch
Outside Diameter	0.5625 inch

About bushings & plain bearings

Flanged Steel Bushing is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.