KB KinnerBuilder
Home / Bushings & Plain Bearings / Flanged Bushing 13mm ID X 18mm OD X 10mm
Flanged Bushing 13mm ID X 18mm OD X 10mm

Flanged Bushing 13mm ID X 18mm OD X 10mm

Steel Bushings & Plain Bearings

This is a flanged bushing with an inner diameter of 13 mm, an outer diameter of 18 mm, and an overall length of 10 mm. The flange has a diameter of 21 mm and a thickness of 3 mm, providing axial support. It is used to guide and support shafts, reducing friction and wear.

Specifications

Flange Diameter21 mm
Flange Thickness3 mm
Inner Diameter13 mm
Outer Diameter18 mm
Overall Length10 mm

About bushings & plain bearings

Flanged Bushing 13mm ID X 18mm OD X 10mm is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in bushings & plain bearings

DU Flanged Bushes Standard Sizes Oilless Bush DU Flanged Bushes Standard Sizes Oilless Bush CHIZHOU TEHCO PRECISION PARTS CO., LTD. 1 supplier Spherical Bushing Plain Bearings GEG17C Spherical Bushing Plain Bearings GEG17C 1 supplier Flanged Bushing Flanged Bushing Oregon 1 supplier Plain Sleeve Bearing Plain Sleeve Bearing Bunting Bearings LLC 1 supplier Flanged Sleeve Bearing Flanged Sleeve Bearing 1 supplier Bronze Bushing 0.392" ID x 0.627" Small OD x 7/8"-1/16" Large OD x 1/2" Tall Bronze Bushing 0.392" ID x 0.627" Small OD x 7/8"-1/16" Large OD x… 1 supplier Small Flanged Bronze Brass Sleeve Bushings Small Flanged Bronze Brass Sleeve Bushings DALON MACHINERY CO., LTD. 1 supplier Thrust Bearing: 1" ID, 1-1/2" OD, 1/16" Thick Thrust Bearing: 1" ID, 1-1/2" OD, 1/16" Thick 1 supplier