Stainless Stock
304, 316 and 17-4 bar, sheet, plate and tube.
Also searched as: 304 stainless316 stainlessstainless sheetstainless bar
-
1/4 in. x 3 ft. S40 WLD Non-Threaded Pipe
Diameter: 1/4 in.Length: 3 ft.Schedule: S40
-
10 x 2-1/2 in. T-25, Flat Head Wood Screw
Drive: T-25Size: 10 x 2-1/2 in.
-
10 x 5/8 in. Phillips Hex Head Sheet Metal Screw
Size: 10 x 5/8 in.
-
14 x 3/4 in. Phillips Pan Head Sheet Metal Screw
Size: 14 x 3/4 in.
-
2 in. 6D Ring Shank Siding Nail
Length: 2 in.Size: 6D
-
3 in. #10 Star Drive Bugle-Head Screw
Length: 3 in.Size: #10
-
3-1/2 in. #10 Star Drive Bugle-Head Deck Screws
Length: 3-1/2 in.Size: #10
-
3/8 in. x 1 ft S40 WLD Non-Threaded Pipe
Diameter: 3/8''Length: 1 ftSchedule: S40
-
3/8 in. x 6 in. Star Drive Wafer Head Structural Screw
Diameter: 3/8 in.Length: 6 in.
-
304 Stainless Steel Perforated Metal Sheet, 15.7 inches x 7.8 inches, 0.25 inch Hexagonal Holes
Dimensions: 15.7 inches by 7.8 inchesHole Shape: hexagonalHole Size: 0.25 inch
-
8 x 1 in. #2 Phillips Drive, Flat Head Screw
Drive: #2 PhillipsSize: 8 x 1 in.
-
SMLS Non-Threaded Pipe
Diameter: 1/4 inchLength: 3 ft.Schedule: S80
-
Steel Wire Rope
Construction: 7x19Diameter: 1/4 in.Length: 200 ft.
-
Threaded Plug, 1-1/2 inch 150 lbs.
Pressure Rating: 150 psiSize: 1-1/2 inch
-
Threaded Tee, 1/8 inch 150 lbs.
Pressure Rating: 150 lbs.Size: 1/8 inch
-
Threaded Tee, 2 inch 150 lbs.
Pressure Rating: 150 lbs.Size: 2 inch
-
WLD Non-Threaded Pipe
Diameter: 1-1/2 in.Length: 1 ft.Schedule: S10
-
WLD NonThreaded Pipe
Diameter: 3/4 inchLength: 3 ft.Schedule: S10
About stainless stock
Stainless steel stock encompasses a range of corrosion-resistant alloys available in various forms, including bar, sheet, plate, and tube. Common grades include 304, 316, and 17-4 PH. 304 stainless steel, an austenitic chromium-nickel alloy, offers good formability and weldability, suitable for general-purpose applications. 316 stainless steel, also austenitic, incorporates molybdenum for enhanced corrosion resistance, particularly against chlorides, making it ideal for marine and chemical processing environments. 17-4 PH (precipitation hardening) is a martensitic stainless steel known for its high strength and hardness, often used in aerospace and medical applications. Stock is defined by its form factor (e.g., round bar, square tube, flat sheet), dimensions (e.g., diameter, thickness, width, length), and surface finish (e.g., mill finish, polished, brushed). Bar stock is typically specified by diameter or cross-sectional dimensions, while sheet and plate are defined by gauge or thickness and overall dimensions. Tubing is specified by outer diameter, wall thickness, and length. Material certifications, such as ASTM A276 or A240, are crucial for verifying alloy composition and mechanical properties.
How to choose
When selecting stainless stock, first determine the required corrosion resistance. Is general-purpose 304 sufficient, or is enhanced resistance to chlorides (316) or high strength (17-4 PH) necessary? Next, define the form factor: bar for machining, sheet/plate for fabrication, or tube for fluid transfer or structural applications. Then, specify the precise dimensions, including outer diameter, thickness, width, and length, ensuring compatibility with design constraints. Finally, consider the surface finish requirements, balancing aesthetic needs with functional demands, such as cleanliness or reduced friction. Verify material certifications to ensure compliance with application standards.