KB KinnerBuilder
Home / Pulleys & Sheaves / XL10 Timing Pulley
XL10 Timing Pulley

XL10 Timing Pulley

MPN XL10 Pulleys & Sheaves

This XL10 Timing Pulley has an 11 mm belt width and a 5.08 mm pitch. It is available with bore sizes of 3.17, 4, 5, 6, 6.35, or 8 mm. This pulley is used in light-duty synchronous applications where precise motion is required.

Specifications

Belt Width11 mm
Bore3.17/4/5/6/6.35/8 mm
Pitch5.08 mm

About pulleys & sheaves

XL10 Timing Pulley is listed under Pulleys & Sheaves — timing pulleys, v-sheaves, idlers and taper-lock bushings. Pulleys and sheaves are mechanical components designed to transmit power and motion through belts, facilitating speed changes, torque multiplication, or directional alteration in power transmission systems. This category encompasses timing pulleys, V-belt sheaves, idler pulleys, and associated taper-lock bushings.

Compare this against other pulleys & sheaves, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in pulleys & sheaves

European Standard Cast Iron Groove V Belt Sheave Pulley with Taper Bushing European Standard Cast Iron Groove V Belt Sheave Pulley with Taper… 1 supplier Timing Pulley, 22 Tooth Count, L Profile Timing Pulley, 22 Tooth Count, L Profile 1 supplier Fixed Pulley Block, 1 Sheave Fixed Pulley Block, 1 Sheave RONSTAN 1 supplier PowerGrip GT2 Sprockets - 8M and 14M, P38-8MGT-20 PowerGrip GT2 Sprockets - 8M and 14M, P38-8MGT-20 Gates 1 supplier 1015 1" Taper-Lock Bushing 1015 1" Taper-Lock Bushing 1 supplier SPA 2-Groove V-Belt Pulley with Taper Lock Bushing SPA 2-Groove V-Belt Pulley with Taper Lock Bushing 1 supplier Customized Taper Bushing Timing Pulley Customized Taper Bushing Timing Pulley 1 supplier HTD Timing Pulley, 12-Tooth HTD Timing Pulley, 12-Tooth 1 supplier