KB KinnerBuilder
Home / O-Rings / Nitrile Rubber O-Ring, 20mm Inner Diameter
Nitrile Rubber O-Ring, 20mm Inner Diameter

Nitrile Rubber O-Ring, 20mm Inner Diameter

uxcell Nitrile Rubber O-Rings

This Nitrile Rubber O-Ring has an inner diameter of 20 mm. This dimension indicates the diameter of the shaft or bore it is designed to seal against. It is typically used in various sealing applications for industrial equipment.

Specifications

Inner Diameter20 mm

About o-rings

Nitrile Rubber O-Ring, 20mm Inner Diameter is listed under O-Rings — buna-n, viton, silicone and epdm o-rings by as568 dash number. O-rings are toroidal seals, typically circular in cross-section, designed to be seated in a groove and compressed during assembly to create a seal between two or more parts. They are critical components in static and dynamic sealing applications across various industries, preventing leakage of fluids or gases.

Compare this against other o-rings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in o-rings

Nitrile Rubber O-Ring Black NBR 1.5mm thickness, 5mm-80mm OD Nitrile Rubber O-Ring Black NBR 1.5mm thickness, 5mm-80mm OD 1 supplier O-Ring O-Ring 1 supplier Viton O Ring Kits Viton O Ring Kits 1 supplier O-Ring for Indexables 5641 005-01 O-Ring for Indexables 5641 005-01 Walter 1 supplier Nitrile Rubber O-Ring, 22mm OD x 18mm ID x 2mm Nitrile Rubber O-Ring, 22mm OD x 18mm ID x 2mm 1 supplier Silicone O Ring, 70 Shore A Hardness Silicone O Ring, 70 Shore A Hardness 1 supplier Viton Round O-Ring Viton Round O-Ring 1 supplier Viton FKM FPM O Ring Viton FKM FPM O Ring 1 supplier