Thrust Bearing: 1" ID, 1-1/2" OD, 1/16" Thick

This Thrust Bearing has an inside diameter of 1 inch, an outside diameter of 1-1/2 inch, and a thickness of 1/16 inch. It is designed for dry lubricant applications. It is typically used to support axial loads and prevent friction between rotating and stationary parts.

Specifications

Inside Diameter	1 inch
Lubricant Type	Dry
Outside Diameter	1-1/2 inch
Thickness	1/16 inch

About bushings & plain bearings

Thrust Bearing: 1" ID, 1-1/2" OD, 1/16" Thick is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.