KB KinnerBuilder
Home / Abrasives / Buff and Blend AP Mounted Flap
Buff and Blend AP Mounted Flap

Buff and Blend AP Mounted Flap

Standard Abrasives Abrasives

This is a Buff and Blend AP Mounted Flap from Standard Abrasives. The mounted flap design allows for use in confined areas and on irregular surfaces. It is typically used for deburring, blending, and finishing applications.

Specifications

MountingMounted

About abrasives

Buff and Blend AP Mounted Flap is listed under Abrasives — sanding discs, flap wheels, cutoff wheels, belts and compounds. Abrasives are consumable tools used for material removal, surface conditioning, and finishing operations. This category encompasses a range of products including sanding discs, flap wheels, cutoff wheels, abrasive belts, and polishing compounds.

Compare this against other abrasives, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in abrasives

Grinding Wheels 4-1/2'' x 1/4'' x 7/8'' Grinding Wheels 4-1/2'' x 1/4'' x 7/8'' 1 supplier 5-Inch 8-Hole Hook and Loop Sanding Disc 220 Grit 5-Inch 8-Hole Hook and Loop Sanding Disc 220 Grit 1 supplier 4 inch x 5/8 inch Aluminum Oxide Flap Disc, 36 Grit 4 inch x 5/8 inch Aluminum Oxide Flap Disc, 36 Grit 1 supplier 4.5 Inch 115mm Cutting Cutoff Wheel Disc for Grinder T41 4.5 Inch 115mm Cutting Cutoff Wheel Disc for Grinder T41 1 supplier Flap Disc Flap Disc Josili 1 supplier Grinding Sandpaper Sheets Grinding Sandpaper Sheets WUTA 1 supplier Dry Wet Sandpaper Dry Wet Sandpaper 1 supplier 6"X.045"X7/8" PRO Metal Steel Cutting Cutoff Wheel General Purpose 6"X.045"X7/8" PRO Metal Steel Cutting Cutoff Wheel General Purpose PRO 1 supplier