KB KinnerBuilder
Home / Bushings & Plain Bearings / Ejector Bushing
Ejector Bushing

Ejector Bushing

PCS MPN 841Z96 Bronze Bushings & Plain Bearings

This ejector bushing has an outside diameter of 1.302 inches. This dimension is critical for its fit within a mold plate. It is typically used in injection molding to guide ejector pins.

Specifications

Outside Diameter1.302 in

About bushings & plain bearings

Ejector Bushing is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in bushings & plain bearings

Flanged Bushing 3/4" ID x 7/8" OD Flanged Bushing 3/4" ID x 7/8" OD Atlantic Bushings 1 supplier 1" ID x 1.5" OD Sintered Bronze Flanged Sleeve Bearing 1" ID x 1.5" OD Sintered Bronze Flanged Sleeve Bearing Oilite 1 supplier Oilite Sleeve Bearing Oilite Sleeve Bearing 1 supplier Bronze Flanged Sleeved Bushing Bronze Flanged Sleeved Bushing OMB Warehouse 1 supplier Oilite Bronze Bushing 3/16 inch ID x 5/16 inch OD x 3/8 inch Oilite Bronze Bushing 3/16 inch ID x 5/16 inch OD x 3/8 inch Oilite 1 supplier Bronze Sleeve Bearing Bronze Sleeve Bearing Hillman 1 supplier Food Industry Oil Embedded Sleeve Bearings Food Industry Oil Embedded Sleeve Bearings ANHUI QIHAN IMPORT & EXPORT CO., LTD. 1 supplier Plain Bushing Bearing, Open, ID 0.250 In Plain Bushing Bearing, Open, ID 0.250 In 1 supplier