KB KinnerBuilder
Home / Bushings & Plain Bearings / Oilless Bushing Sleeve Bearing, 1.26inch Bore 1.42
Oilless Bushing Sleeve Bearing, 1.26inch Bore 1.42

Oilless Bushing Sleeve Bearing, 1.26inch Bore 1.42

Othmro Carbon steel, Sintered porous bronze Bushings & Plain Bearings

This Othmro oilless bushing sleeve bearing has a bore of 1.26 inches. The bore size indicates the diameter of the shaft it can accommodate. It is used to provide a low-friction surface for rotating or sliding parts without requiring lubrication.

Specifications

Bore1.26"
Outside Diameter1.42"

About bushings & plain bearings

Oilless Bushing Sleeve Bearing, 1.26inch Bore 1.42 is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in bushings & plain bearings

PTFE, J-4200, Sleeve Bearing PTFE, J-4200, Sleeve Bearing BUNTING BEARINGS 1 supplier JDB Solid Bronze Bushing with Graphite Lubrication JDB Solid Bronze Bushing with Graphite Lubrication 1 supplier Flanged Bushing 3/4" ID x 7/8" OD Flanged Bushing 3/4" ID x 7/8" OD Kelley Atlantic 1 supplier Plain Sleeve Bearing 12mm Bore x 14mm OD x 20mm L Plain Sleeve Bearing 12mm Bore x 14mm OD x 20mm L Bettomshin 1 supplier Magnetic Flanged Bushing, 1/4 ID x 7/16 OD x 3/8 Tall Magnetic Flanged Bushing, 1/4 ID x 7/16 OD x 3/8 Tall 1 supplier Flanged Sleeve Bearing, 18mm NID x 20mm NOD x 20mm NL Flanged Sleeve Bearing, 18mm NID x 20mm NOD x 20mm NL 1 supplier Flanged Bronze Bushing 1/2" ID x 5/8" OD x 3/4" L Flanged Bronze Bushing 1/2" ID x 5/8" OD x 3/4" L 1 supplier Lined Sleeve Bearing, 32.000mm/32.025mm Bore x 32mm OD x 25mm L Lined Sleeve Bearing, 32.000mm/32.025mm Bore x 32mm OD x 25mm L 1 supplier