KB KinnerBuilder
Home / O-Rings / O-Ring
O-Ring

O-Ring

Silicone O-Rings

This O-Ring has a cross section of 1.5 mm, an inside diameter of 11 mm, and an outside diameter of 14 mm. These dimensions define its size for specific sealing requirements. It is used in applications where these precise measurements are critical for sealing.

Specifications

Cross Section1.5 mm
Inside Diameter11 mm
Outside Diameter14 mm

About o-rings

O-Ring is listed under O-Rings — buna-n, viton, silicone and epdm o-rings by as568 dash number. O-rings are toroidal seals, typically circular in cross-section, designed to be seated in a groove and compressed during assembly to create a seal between two or more parts. They are critical components in static and dynamic sealing applications across various industries, preventing leakage of fluids or gases.

Compare this against other o-rings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in o-rings

Nitrile 'O' Ring, 3/8 in. OD x 1/4 in. ID x 1/16 in. Thickness Nitrile 'O' Ring, 3/8 in. OD x 1/4 in. ID x 1/16 in. Thickness 1 supplier Buna-N Round O-Ring Buna-N Round O-Ring 1 supplier Rubber O-Ring, 3/16" x 5/16" x 1/16" Rubber O-Ring, 3/16" x 5/16" x 1/16" Midwest Fastener 1 supplier 7/16 in. O.D x 1/4 in. I.D x 3/32 in. Thickness Nitrile 'O' Ring 7/16 in. O.D x 1/4 in. I.D x 3/32 in. Thickness Nitrile 'O' Ring Hillman 1 supplier Viton O Ring for Pump Sealing Viton O Ring for Pump Sealing 1 supplier Viton O Ring Cord Viton O Ring Cord 1 supplier O-Ring: 10.50 mm OD, 8.50 mm ID, 1.00 mm Thick O-Ring: 10.50 mm OD, 8.50 mm ID, 1.00 mm Thick 1 supplier AS568 O'Ring Seal #007, Buna-N 70A Durometer AS568 O'Ring Seal #007, Buna-N 70A Durometer EAI 1 supplier