KB KinnerBuilder
Home / Oil & Shaft Seals / ID 12mm NBR double lip oil seal TC-12*19/20/ 12x19-32x10mm
ID 12mm NBR double lip oil seal TC-12*19/20/ 12x19-32x10mm

ID 12mm NBR double lip oil seal TC-12*19/20/ 12x19-32x10mm

NBR Oil & Shaft Seals

This is an NBR double lip oil seal, TC type, with a 12mm inner diameter and dimensions ranging from 12x19x10mm to 12x32x10mm. The 12mm inner diameter fits shafts of that size, while the varying outer diameters accommodate different housing bores. It is used to seal rotating shafts, providing enhanced sealing with its double lip design.

Specifications

Dimensions12x19-32x10mm
Inner Diameter12mm

About oil & shaft seals

ID 12mm NBR double lip oil seal TC-12*19/20/ 12x19-32x10mm is listed under Oil & Shaft Seals — rotary lip seals, v-rings and radial shaft seals. Oil and shaft seals are critical components designed to retain lubricants and exclude contaminants in rotating equipment. This category encompasses rotary lip seals, V-rings, and various radial shaft seal configurations.

Compare this against other oil & shaft seals, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in oil & shaft seals

Lip Seal, 1-3/8 in. Shaft Dia, 2-9/16 in. Housing Bore, 3/8 in. Nominal Width Lip Seal, 1-3/8 in. Shaft Dia, 2-9/16 in. Housing Bore, 3/8 in.… Skf 1 supplier Small-size Skeleton Oil Seal NBR ID 8mm 8x12x2 8x12x3 Small-size Skeleton Oil Seal NBR ID 8mm 8x12x2 8x12x3 1 supplier Lip Seal, 3-1/2 in. Shaft Dia, 4-1/2 in. Housing Bore, 1/2 in. Nominal Width Lip Seal, 3-1/2 in. Shaft Dia, 4-1/2 in. Housing Bore, 1/2 in.… Johns Manville 1 supplier CR06-P V-Ring Seal CR06-P V-Ring Seal 1 supplier Lower Shaft Double Lip Seal Lower Shaft Double Lip Seal BIRO 1 supplier Pump Motor Shaft Seal, 5/8" Pump Motor Shaft Seal, 5/8" JSB 1 supplier Metric Oil Shaft Seal Single Lip Metric Oil Shaft Seal Single Lip 1 supplier Oil Seal Oil Seal TB 1 supplier