KB KinnerBuilder
Home / Bushings & Plain Bearings / Flanged Sleeve Bearing M4 5mmx5.5mm
Flanged Sleeve Bearing M4 5mmx5.5mm

Flanged Sleeve Bearing M4 5mmx5.5mm

MPN M4 Nylon Bushings & Plain Bearings

This is a flanged sleeve bearing with a bore diameter of 5 mm and an outer diameter of 5.5 mm. The flange provides axial location and support. It is commonly used in applications requiring rotational or linear motion with reduced friction.

Specifications

Bore Diameter5 mm
Outer Diameter5.5 mm

About bushings & plain bearings

Flanged Sleeve Bearing M4 5mmx5.5mm is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in bushings & plain bearings

Oilite Brass Bushing Bearing 4mm ID Oilite Brass Bushing Bearing 4mm ID Oilite 1 supplier Sintered Bronze Bearing Sintered Bronze Bearing Bunting Bearings, LLC 1 supplier Bushing 3/8" ID x 1/2" OD x 1/4" L Bushing 3/8" ID x 1/2" OD x 1/4" L Kelley Bushings 1 supplier Flanged Sleeve Bearing Flanged Sleeve Bearing Boston Gear 1 supplier Solid Bar Stock Solid Bar Stock Bunting Bearings, LLC 1 supplier Plain Sleeve Bushing Plain Sleeve Bushing Bunting Bearings, LLC 1 supplier Plain Bushing Bearing, Closed, ID 0.375 In Plain Bushing Bearing, Closed, ID 0.375 In Thomson 1 supplier PTFE Bronze Bushings PTFE Bronze Bushings 1 supplier