Flanged Bushing 7/8"x1-1/8"x1"

This is a flanged bushing with an inner diameter of 0.875 inches, an outer diameter of 1.125 inches, and an overall length of 1 inch. The flange has an outer diameter of 1.5 inches and a width of 0.125 inches. This bushing is used to provide a bearing surface and axial retention for rotating or sliding components.

Specifications

Flange Outer Diameter	1.5 in
Flange Width	0.125 in
Inner Diameter	0.875 in
Outer Diameter	1.125 in
Overall Length	1 in

About bushings & plain bearings

Flanged Bushing 7/8"x1-1/8"x1" is listed under Bushings & Plain Bearings — bronze, sintered, ptfe-lined and polymer sleeve bearings. Bushings and plain bearings facilitate relative motion between two components, typically a shaft and a housing, by providing a low-friction, wear-resistant interface. Unlike rolling-element bearings, plain bearings operate on a sliding principle, relying on a lubricant film or the inherent lubricity of the bearing material.

Compare this against other bushings & plain bearings, or search the full index for equivalents from other manufacturers.