KB KinnerBuilder
Home / Hydraulic & Pneumatic Seals / Wiper Seal 63x77x8/11mm
Wiper Seal 63x77x8/11mm

Wiper Seal 63x77x8/11mm

EAI Nitrile Rubber Hydraulic & Pneumatic Seals

This is a Wiper Seal from EAI with a height of 8/11 mm, an inner diameter of 63 mm, and an outer diameter of 77 mm. This seal is used to prevent dirt and moisture from entering hydraulic or pneumatic cylinders.

Specifications

Height8/11 mm
Inner Diameter63 mm
Outer Diameter77 mm

About hydraulic & pneumatic seals

Wiper Seal 63x77x8/11mm is listed under Hydraulic & Pneumatic Seals — rod, piston, wiper, backup rings and u-cups. Hydraulic and pneumatic seals are critical components for preventing fluid or gas leakage in dynamic and static applications. This category encompasses a range of seal types, including rod seals, piston seals, wiper seals, backup rings, and U-cups.

Compare this against other hydraulic & pneumatic seals, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in hydraulic & pneumatic seals

Polyurethane Loaded Lip Seal 1-3/4"ID x 2-1/8"OD x 3/16"H Polyurethane Loaded Lip Seal 1-3/4"ID x 2-1/8"OD x 3/16"H 1 supplier Polyurethane Loaded Lip Seal 1/2"ID x 7/8"OD x 3/16"H Polyurethane Loaded Lip Seal 1/2"ID x 7/8"OD x 3/16"H 1 supplier High-Pressure Single-Acting PU U-Cup MU3 Type High-Pressure Single-Acting PU U-Cup MU3 Type 1 supplier 4MA Piston Seal Kit 4MA Piston Seal Kit Parker 1 supplier Polyurethane 605 Series Oil Seal Ring Piston Rod Seal Polyurethane 605 Series Oil Seal Ring Piston Rod Seal 1 supplier Hydraulic/Pneumatic PRod Hydraulic/Pneumatic PRod Chicago Rawhide 1 supplier Spring Energized Rod Seal, 2-7/8" ID Spring Energized Rod Seal, 2-7/8" ID USA Industrials 1 supplier High-Pressure Standard High Pressure Piston Seal Plunger Pump Seals High-Pressure Standard High Pressure Piston Seal Plunger Pump Seals Hebei SPT Seals Technology Co., Ltd. 1 supplier