KB KinnerBuilder
Home / Hydraulic & Pneumatic Seals / Wiper Seal 50x60x7/10 mm
Wiper Seal 50x60x7/10 mm

Wiper Seal 50x60x7/10 mm

EAI Nitrile Rubber Hydraulic & Pneumatic Seals

This is a Wiper Seal from EAI with a height of 7/10 mm, an inner diameter of 50 mm, and an outer diameter of 60 mm. This seal is used to prevent the ingress of dirt and other foreign particles into hydraulic cylinders.

Specifications

Height7/10 mm
Inner Diameter50 mm
Outer Diameter60 mm

About hydraulic & pneumatic seals

Wiper Seal 50x60x7/10 mm is listed under Hydraulic & Pneumatic Seals — rod, piston, wiper, backup rings and u-cups. Hydraulic and pneumatic seals are critical components for preventing fluid or gas leakage in dynamic and static applications. This category encompasses a range of seal types, including rod seals, piston seals, wiper seals, backup rings, and U-cups.

Compare this against other hydraulic & pneumatic seals, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in hydraulic & pneumatic seals

Air Hydraulic Bottle Jack Repair Kit Seals Air Hydraulic Bottle Jack Repair Kit Seals 1 supplier U Cup Single Lip Hydraulic Seal U Cup Single Lip Hydraulic Seal 1 supplier KDAS Composite Piston Seal KDAS Composite Piston Seal DOKING INDUSTRIAL LIMITED 1 supplier Spring Energized Seal Spring Energized Seal 1 supplier Spring Energized Rod Seal, 5/16" ID Spring Energized Rod Seal, 5/16" ID USA Industrials 1 supplier Hydraulic Jack Piston U-Cup Seal 1.64IN OD Hydraulic Jack Piston U-Cup Seal 1.64IN OD 1 supplier Spring Energized Seal Spring Energized Seal 1 supplier Spring Energized Rod Seal, 11/16" ID Spring Energized Rod Seal, 11/16" ID USA Industrials 1 supplier