KB KinnerBuilder
Home / Tubing / Clear Nylon Metric Tubing
Clear Nylon Metric Tubing

Clear Nylon Metric Tubing

Dixon MPN 1025P0800 Nylon Tubing

This clear nylon metric tubing from Dixon, MPN 1025P0800, has an inside diameter of 6 mm and an outside diameter of 8 mm, resulting in a 1 mm wall thickness. These dimensions are critical for flow rate and pressure handling. It is typically used for general purpose fluid or air transfer where metric sizing is required.

Specifications

Inside Diameter6 mm
Outside Diameter8 mm
Wall Thickness1 mm

About tubing

Clear Nylon Metric Tubing is listed under Tubing — polyurethane, nylon, ptfe, copper and stainless tubing by od. Tubing serves as a conduit for fluids and gases in pneumatic, hydraulic, and process control systems. Selection is primarily driven by application requirements concerning pressure, temperature, chemical compatibility, and flexibility.

Compare this against other tubing, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in tubing

PA6 Nylon Tube Hard Pipe PA6 Nylon Tube Hard Pipe 1 supplier PA11 PA12 Nylon Tubing PA11 PA12 Nylon Tubing 1 supplier Heat Shrink Tubing 3/32" Red White & Black Tri Color Lot Heat Shrink Tubing 3/32" Red White & Black Tri Color Lot 1 supplier Polyethylene Tubing Polyethylene Tubing 1 supplier PTFE Tube: 0.252" ID, 0.319" OD, 25' Long PTFE Tube: 0.252" ID, 0.319" OD, 25' Long USA Industrials 1 supplier 9.50mm ID x 12mm OD x 500' L Clear Nylon Flexible Tubing 9.50mm ID x 12mm OD x 500' L Clear Nylon Flexible Tubing 1 supplier Black Poly Tubing Roll - 6 Mil, 12" x 1,000' Black Poly Tubing Roll - 6 Mil, 12" x 1,000' 1 supplier Pneumatic Tubing Pipe Pneumatic Tubing Pipe 1 supplier