KB KinnerBuilder
Home / Hydraulic Cylinders / 20T CP-180 Hydraulic Ram Cylinder Jack, 50mm Stroke
20T CP-180 Hydraulic Ram Cylinder Jack, 50mm Stroke

20T CP-180 Hydraulic Ram Cylinder Jack, 50mm Stroke

MPN CP-180 steel Hydraulic Cylinders

This is a CP-180 hydraulic ram cylinder jack with a 20-ton capacity and a 50 mm stroke. It operates at 70 MPa pressure and has an oil capacity of 350 CC. This jack is used for lifting or applying force in confined spaces where a short stroke is sufficient.

Specifications

Capacity20 ton
Oil Capacity350 CC
Pressure70 MPa
Stroke50 mm

About hydraulic cylinders

20T CP-180 Hydraulic Ram Cylinder Jack, 50mm Stroke is listed under Hydraulic Cylinders — tie-rod, welded, telescopic and custom-stroke hydraulic rams. Hydraulic cylinders convert hydraulic power into linear mechanical force and motion. They consist of a cylinder barrel, a piston, and a piston rod.

Compare this against other hydraulic cylinders, or search the full index for equivalents from other manufacturers.

Where to buy

1 supplier carry this part. Prices are last-seen and change without notice.

Others in hydraulic cylinders

Hollow Hydraulic Ram, 5/16" Stroke, 6 ton Hollow Hydraulic Ram, 5/16" Stroke, 6 ton ENERPAC 1 supplier Tie Rod Hydraulic Cylinder Tie Rod Hydraulic Cylinder WEN 1 supplier Welded Hydraulic Cylinder Clevis Welded Hydraulic Cylinder Clevis 1 supplier Cross Tube Hydraulic Cylinder Cross Tube Hydraulic Cylinder WEN 1 supplier NCA1 Medium Duty Tie Rod Cylinder NCA1 Medium Duty Tie Rod Cylinder 1 supplier Welded Hydraulic Cylinder, 2 in Bore Dia., 12 in Stroke Lg Welded Hydraulic Cylinder, 2 in Bore Dia., 12 in Stroke Lg 1 supplier Cross Tube Hydraulic Cylinder Cross Tube Hydraulic Cylinder WEN 1 supplier Welded Hydraulic Cylinder, 3.5 in Bore Dia., 40 in Stroke Lg Welded Hydraulic Cylinder, 3.5 in Bore Dia., 40 in Stroke Lg 1 supplier