1-3/4 in. O.D. x 1-1/4 in. I.D. x 24 in. Braided Vinyl Tube
This is a braided vinyl tube with a 1-3/4 inch O.D., 1-1/4 inch I.D., and 24 inch length. The 1-1/4 inch inside diameter allows for a specific flow rate, and the 24 inch length provides a short connection. This tube is typically used for low-pressure fluid transfer applications.
Specifications
| Inside Diameter | 1-1/4 in. |
|---|---|
| Length | 24 in. |
| Outside Diameter | 1-3/4 in. |
About hose & hose assemblies
1-3/4 in. O.D. x 1-1/4 in. I.D. x 24 in. Braided Vinyl Tube is listed under Hose & Hose Assemblies — hydraulic, air, water, chemical and suction hose plus crimped ends. Hose and hose assemblies are flexible conduits designed to transport fluids or gases under varying pressure conditions. They are categorized by the fluid they convey: hydraulic, air, water, chemical, and suction hoses.
Compare this against other hose & hose assemblies, or search the full index for equivalents from other manufacturers.
Where to buy
1 supplier carry this part. Prices are last-seen and change without notice.
-
Home Depot distributor · USSee priceView at Home Depot →
Others in hose & hose assemblies
Suction and Discharge Hose
1 supplier
Suction Hose 1/2 inch id -10ft Clear Wire
ZY-hosetube
1 supplier
Hydraulic Hose Assemblies F487TC0101-8-8-8-36.00
Parker
1 supplier
Non-Conductive Open Pitch True ID Convoluted PTFE Hose
Dixon
1 supplier
PTFE Hose Assembly
SEB PROFESSIONAL
1 supplier
10AN Fuel Line Kit, 10 FT. Fuel Hose Kit, 0.55 in. Nylon
1 supplier
Air Hose
CONTINENTAL
1 supplier
Hydraulic Hose Assembly EN853 2SN DN 10 Hose 3/8
Flowfit
1 supplier